Cena | €17 |
2 mils thick with a silicone adhesive designed for heater platforms on 3D printers. Works excellent with ABS and HIPS filaments. čítajte viac
Opís
2 mils thick with a silicone adhesive designed for heater platforms on 3D printers. Works excellent with ABS and HIPS filaments.
- Does not soften at elevated temperatures
- Provides an excellent release surface at elevated temperatures RoHS and REACH compliant
- Size: 10cm x 15m (4in x 49ft)
Vlastnosti
Download Technical Data
| Specification | Unit | Testing Data |
|---|---|---|
| Appearance | - | Smooth surface, no bubble, no wrinkle, soft and flexible |
| Thickness | Mm | 0.06mm+/-0.002mm (film: 0.025mm) |
| Elasticity (tensile strength) | Mpa. | >/= 140 |
| Elongation | % | >/= 40 |
| Breakdown strength | MV/m | >/= 150 |
| Surface Resistivity | - | >/= 1.0X10^13 |
| Volume Resistance | .com | >/= 1.0X10^15 |
| Dielectric constant | 10^6 hertz | 3--4 |
| Dielectric loss angle | 10^6 hertz | |
| Withstanding Voltage | KV | 6 |
| 180 peel force | N/25mm | 6-6.5 |
| Temperature resistance | 30 mins. | 260°C |
Hodnotenie
Pridať recenziu
Tam ešte nikto nepísal; buď prvý!
